When configuring VLANs on a switch what is used to identify which VLAN a device belongs to correct answer?

In order for 802.1Q compatible hardware to identify what VLAN a data packet belongs to, an 802.1Q Header is added to the Ethernet frame which specifies the VLAN ID. This VLAN ID tag may be added or removed by a host, a router, or a switch.

Read More

Thereof, when configuring vlans on a switch which type of switch ports are members of all vlans defined on the switch?

A trunk port carries the traffic of multiple VLANs and by default is a member of all VLANs in the VLAN database. Two types of trunk ports are supported: ISL trunk port - All received packets are expected to be encapsulated with an ISL header, and all transmitted packets are sent with an ISL header. How does a switch identify devices that are in different VLANs? A network switch distinguishes between VLANs by associating end-stations to a specific VLAN. This is known as VLAN membership. An end-station must become a member of a VLAN before it can share the broadcast domain with other end-stations on that VLAN.

Keeping this in consideration, what are the vlan membership types?

Two types of VLAN membership methods exists and they are Static and Dynamic. The difference between static and dynamic VLANs are given below. Static VLANs: In a static VLAN, the network administrator creates a VLAN and then assigns switch ports to the VLAN. Static VLANs are also called port-based VLANs. Regarding this, what is vxlan used for? VXLAN is an encapsulation protocol that provides data center connectivity using tunneling to stretch Layer 2 connections over an underlying Layer 3 network. In data centers, VXLAN is the most commonly used protocol to create overlay networks that sit on top of the physical network, enabling the use of virtual networks.

What is a VLAN primarily used for?

VLANs allow network administrators to automatically limit access to a specified group of users by dividing workstations into different isolated LAN segments. When users move their workstations, administrators don't need to reconfigure the network or change VLAN groups. What are switch ports? On a network switch, the switch port is the physical opening where a data cable can be plugged in. Generally, switch ports are rectangular on three sides with a V-shaped point on either the top or the bottom. A network administrator can configure each port in a managed switch to create a complex VLAN.

One may also ask what are types of switch ports?

Switch ports can be classified in following types based on network architecture :

• Access Port :
• Trunk Port :
• Hybrid Port :
• Combo Port :
• Stack Port :
• PoE (Power over Ethernet) Port :
• RJ45 Port :
• SFP Port :

In respect to this, which port on a switch is used to manage the switch? The console port is used to connect a computer directly to a Gigabit Ethernet switch and manage the switch since there is no display device for the switch. In most cases, it is the very first step to configure your network switch. Here are the detailed steps of logging in to a network switch via the console port.

Moreover, how communication about vlans is communicated between switches?

Each VLAN is its own subnet and broadcast domain, which means frames that broadcast onto the network are only switched between the ports within the same VLAN. For Inter-VLAN communication, a layer 3 device (usually a router) is needed.